0%

    Pump for 2 membranes RO 4040

    Brand: Shimge
    Origin: China

    $201,69$406,25

    PROMOTION
    • Get an immediate 5% discount on your total order when purchasing more than 10 units of product. Please log in to cart and checkout to receive the offer immediately
    • Pay with MoMo and get 2% discount - View your cart
    • Product unit price: VAT included
    • Commitment to quality: With every product sold, we are always committed to providing quality to customers. For any complaints, you can contact directly to hotline 0913 90 72 74
    • Product: 100% genuine, original, original packaging
    • Warranty: 12 months, return within 14 days if there is a manufacturer defect
    • Transportation and installation: Reputable - fast - on time
    • After-sales service: Peace of mind, dedicated to customers.

    Pump for 2 membranes RO 4040

    Features, technical specifications, drawings in the product catalog:

    PLD pump Spec
    PLD pump Spec
    PLD pump Spec -1
    PLD pump Spec
    BLT2 Spec
    BLT2 Spec
    • To select filter pump for specific application, following data is required.
      • Capacity (litre / hr)
      • Total head (bar)
      • And a few additional factors such as: suction, solution temperature,…
    • A wide range of accessories including: check valves, gate valve, anti-vibration joints, level sensors, pressure tanks, pressure gauges etc. Available upon request to complete the filter system.

    The facility chooses a pump for Pump for 2 membranes RO 4040 for your filtration system

    1. For low pressure RO 4040 membrane: design flux is from 200 L/H to 400L/H depending on input water quality and your treatment system design. For example, if the recovery rate is 50%, the amount of feed water supplied is 800L/H to 1600L/H. Operating pressure ranges from 5bar to 10bar
    2. For high pressure RO 4040 membrane: design flux is from 200 L/H to 400L/H depending on input water quality and your treatment system design. For example, if the recovery rate is 50%, the amount of feed water supplied is 800L/H to 1600L/H. Operating pressure ranges from 8bar to 15bar

    Introduction to Shimge multistage vertical pump

    Multistage vertical pumps are designed with multiple impellers mounted on a common shaft. Each impeller includes curved blades that accelerate the fluid and increase its pressure. The number of impellers can be varied depending on the desired pressure requirement. The propellers are installed in series, one after another, on a single shaft driven by a motor located above.

    These graphs show that for any given size pump, if the number of impellers increases, the available pressure also increases. Also, note that as flow is reduced, more pressure is available for the same number of impellers, or in other words as flow is increased, available pressure is reduced. That’s why it’s important to choose a pump that can handle maximum flow at the required pressure.

    BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump)boasts characters of high effi ciency, low noise, steady operation, etc.The pump set adopts the non-self-priming vertical multi-stage structure, which makes a compact whole,its installation easy, its operation and maintenance convenient.

    Vertical Multustage pump-1
    Vertical Multustage pump

    Operation limits of Shimge multistage vertical pump

    • The temperature of the fluid does not exceed +60 °C (for PLD Model);
    • Medium temperature: normal type:0℃ ~68℃ hot water type:0℃ ~120℃,(For BLT model)
    • Ambient temperature does not exceed +40°C;
    • The PH value of the medium is from 6.5 to 8.5, the volume fraction of solid impurities in the medium is ≤ 0.1%, and
      Particle size is ≤ 0.2mm.
    • Maximum working pressure is 15 bar;
    • The highest altitude is 1000m;
    PLD pump-5
    PLD pump

    Applications of Shimge multistage vertical pump

    • The product has the characteristics of cost-effectiveness, high pressure and low noise, etc.
    • PL(D) is widely used in many fields, such as water supply systems, water filtration and pressure boosting systems for pipelines, washing and cleaning, boiler feed water, cooling water circulation, water treatment, ultrafiltration, osmosis reflux system, tap water with fertilizer integration, etc.

    Low pressure RO 4040 membrane products are compatible with the reference pump

    High pressure RO 4040 membrane products are compatible with the reference pump

    Product is waiting for user manual to be updated
    Please contact the technical department for support and instructions for use:

    Mr. Huy – 0913274433

    Mr. Lực – 0919569221

    Email: cskh@thietbinganhnuoc.com

    Reviews

    There are no reviews yet.

    Be the first to review “Pump for 2 membranes RO 4040”