High rejection RO element Dupont BW30 PRO-400

High rejection RO element Dupont BW30 PRO-400

Introduction of High rejection RO element Dupont BW30 PRO-400:

FilmTec™ BW30 PRO-400 is a high rejection and high performance industry-standard brackish water reverse osmosis membrane element.

Elements with a hard shell exterior are recommended for systems with multiple-element housings containing three or more membranes, as they are designed to withstand higher pressure drops.

Features, technical specifications, drawings in the product catalog:

Outstanding advantages of High rejection RO element Dupont BW30 PRO-400:

• Delivers consistent water quality and higher rejection and flow than previous generation FilmTec™ BW30 product
• Based on historical FilmTec™ BW30 industry-standard RO membrane with decades of proven performance
• Outstanding durability resulting in stable, long-term performance and sustainable water solutions
• Enhanced fouling protection thanks to 28 mil feed spacer

Operating conditions of High rejection RO element Dupont BW30 PRO-400:

• Membrane Type:  Polyamide Thin-Film Composite
• Maximum Operating Temperature: 113°F (45°C)
• Maximum Operating Pressure: 600 psi (41 bar)
• Maximum Feed Flow Rate: 75 gpm (17 m3/hr)
• Maximum Pressure Drop: 15 psig (1.0 bar) per element, 50 psig (3.5 bar) Per Pressure Vessel (Minimum 4 Elements)
• pH Range, Continuous Operation: 2 – 11
• pH Range, Short-Term Cleaning: 1 – 13
• Maximum Feed Silt Density Index: SDI = 5
• Free Chlorine Tolerance <0.1 ppm

Factors that need to be collected to choose the right type of RO membrane:

1. What is the input water? (Sea water, brackish water, river water, well water, city water supply water, wastewater (with or without UF pretreatment), level 1 RO water, level 2 RO water)
2. Capacity needed to treat water per day, per hour?
3. Main indicators of raw water quality: TDS, pH, temperature, salinity, hardness, silica…
4. Desired water output quality? (used for what, eating or living or production?)
5. Installation area to be able to choose membrane housing length configuration

Select the permeate flow design capacity for each 8inch RO membrane for different types of input water:

1. RO water: SDI (Silt Density Index) = 1, design flow 34LPH for 1m2 = 1.250m³/h
2. Brackish water is well water: SDI (Silt Density Index) = 3, design flow 25-27LPH = 0.925-0.999m³/h
3. Brackish water is surface water: SDI (Silt Density Index) = 5, design flow 18-21LPH = 0.666-0.777m³/h
4. Sea water: SDI (Silt Density Index) = 5, design flow 12-13LPH = 0.444-0.481m³/h
5. Wastewater with UF pretreatment: SDI (Silt Density Index) = 3, design flow 18LPH  = 0.666m³/h
6. Wastewater Without UF pretreatment: SDI (Silt Density Index) = 5, design flow 15LPH = 0.555m³/h

Where to buy Dupont RO membrane?

Song Phung Company is a direct distributor of Dupont RO membranes (Down brand) in Vietnam. Each RO membrane product has documents proving the manufacturer’s clear origin and has a quality certificate issued by a competent authority and is carefully inspected by the Customs agency before passing through the port.

Known as a reputable unit in providing RO membranes with a team of dedicated customer care staff, Song Phung Environmental Company will be a place where you can place your trust.

Above, Song Phung Environmental Company has just provided you with detailed information about RO membranes. If you want to buy this product, please contact us immediately for the most dedicated advice!

In addition, Song Phung Environmental Company also provides comprehensive system solutions from design to supply, installation, operation and technology transfer. Up to now, Song Phung Environmental Company has become a reputable and trustworthy brand with more than 5000+ cooperative customers and 4000+ projects implemented in most business fields.

Suggest main products that should be equipped with this RO membrane

Pump for RO 8040 membrane

$218,10 – $241,29

-4%

8inch SS membrane housing flange type – 300PSI

$471,83 Original price was: $471,83.$450,98Current price is: $450,98.

8inch SS membrane housing clamp type – 300PSI

$356,19 – $488,33

-2%

8inch FRP membrane housing – 300PSI

$179,43 – $491,58