Filter pump 5-6m3h – Shimge

Filter pump 5-6m3h – Shimge

Features, technical specifications, drawings in the product catalog:

• To select filter pump for specific application, following data is required.
  • Capacity (litre / hr)
  • Total head (bar)
  • And a few additional factors such as: suction, solution temperature,…
• A wide range of accessories including: check valves, gate valve, anti-vibration joints, level sensors, pressure tanks, pressure gauges etc. Available upon request to complete the filter system.

The facility chooses a 5-6m3/h pump for your filtration system

1. 1-stage filter using manual valve: filter through 1 filter tank with diameter from D600mm to D750mm (Filter Tank  2472 to 3072) + manual multi-port valve N56D1: Select the filter pump model BW8-4 as appropriate, the following water The filter can up to a height of 20-25m. Or if you want the filtered water higher pressure you can choose BWJ4-6, it can be up to 25-30m
2. 1-stage filter using automatic valve: filter through 1 filter tank with diameter from D600mm to D750mm (Filter Tank  2472 to 3072) + multi-port automatic control valve F75A1: Choose filter pump model BW8-4 as appropriate, Filtered water can be up to a height of 20-25m. Or if you want the filtered water higher pressure you can choose BWJ4-6, it can be up to 25-30m
3. 2-stages filter using manual valve: filtered through 2 filter tanks with diameters fromD600mm to D750mm (Filter Tank  2472 to 3072) + 2 manual multi-port valve N56D1: Choose filter pump model BW8-4, filtered water can up to a height of 10-15m. Or if you want the filtered water higher pressure you can choose BWJ4-6, it can be up to 15-20m
4. 2-stages filter using automatic valve: filtered through 2 filter tanks with diameters from D600mm to D750mm (Filter Tank  2472 to 3072) + 2 multi-port automatic control valve F75A1: Choose filter pump model BW8-4 as appropriate, filtered water can be up to a height of 10-15m. Or if you want the filtered water higher pressure you can choose BWJ4-6, it can be up to 15-20m

Introduction to Shimge horizontal pump

The BW, BWJ(T) stainless steel multistage horizontal centrifugal pump is a non-self-priming pump used to transport liquids. They are classified into two types: cylindrical type and sectional type. It uses a horizontal motor and alloy mechanical seal, making replacement more convenient. The pump head is made of 304 stainless steel, applicable to mildly corrosive environments. Relying on high performance, energy saving performance, reliable quality, wide range of uses, our products have received widespread popularity after their launch.

Application limits of Shimge horizontal filter pump

• Temperature range of environment: Normal type 0 ~ + 68 ℃, hot water type 0 ~ + 120 ℃
• Maximum ambient temperature: +40 ^oC
• Maximum working pressure: 10 bar
• When the density or viscosity of the solution exceeds that of water, it is necessary to choose a high-power drive motor.
• pH: 6.5 to 8.5

Applications of Shimge horizontal filter pump:

• Air conditioning system
• Aquaculture
• Cooling system
• Industrial hygiene
• Environmental applications
• Water treatment (Water filtration)
• Fertilizer/metering system
• Other special applications